X Notice This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. ...

X Notice This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. ...

Originally Posted by Becker These die plates are used in another process in my facility and an item we keep for future use after they have been machined. That being said, my machining time is not very critical considering that ...

Hi,I had belt slip by couple teeth on my vm10, it moved enough so the tool changer couldn't grab tools correctly. Machine is still under warranty, so I called technician to come in. He literally set the spindle by eye ...

I'm designing a new product that would run very nicely on a simple two axis barfed 5C lathe with a sub-spindle. Small diameter, nothing too tricky. Ideally I could find something like the Haas Chucker with a sub-spindle. I don't ...

I have a three small gears that a customer wants made. One gear is .854" in diameter, .199" thick with 34 teeth. It appears to be injection molded out of some plastic. I would like to make this gear out ...

I recently made some tool change wrenchs out of 4140HT on the Hurco retrofit KMB1 in my shop. I used 1/4" 4 flute altin coated Accupro for the job with an air blast, and it worked perfectly to slot the ...

disregard the sub program error on startup.As for the magazine, go around to the side, (doors closed) turn the switch to manual and jog the magazine. Sometimes the magazine gets stuck in-between locations, so that could be your issue. And ...