Hi,We are looking at a production job that has significant number of 10-32 Spiralock threads in 316 Stainless. This thread profile is unique to Stanley Spiralock and requires their very expensive taps/thread gages. We don't have any experience with this ...

On those special occasions where I want a super spiffy finish on a facemilled part, I just take out all the inserts but one and run it fly cutter style. Its amazing how good of a finish you can get ...

Was running my 96 BP VMC1000 for 8 hours straight today doing 3d profiling on an investment cast mold part. At 530, I was a few feet away at the workbench waiting for the nearly complete program to finish. Suddenly ...

This page is what I use to remind myself how to do it when I reload parameters on a 0 control.Fanuc 0 Memory Backup ProcedureBasically, enter 900 parameters, setup a pc to send/receive all of the rest. Hopefully you also ...

Originally Posted by jIMB3893 I don't follow how to bring the tool back to the clearance plane after the first group of operations.Also, I can't see how the peck is supposed to be set up. The following file was posted ...

Ok I used to knurl when i worked in a production shop but that was years ago. I have since forgotten how to set up and program a knurling job.I need to program a knurl in D2 tool steel using ...