Get Fusion360 CAD/CAM and learn how to use it, (YouTube is your friend here).Go around to all the regional factories, hand out business cards and discuss your abilities. Emphasize low overhead and quick turnaround.If you can’t get in the front ...

Couple things:1- I personally find Raptor dovetail fixtures to be a couple steps up in quality compared to the 5th Axis ones, but not quite enough to make the extra price worth it. I also like that 5th Axis uses ...

Heya all! I have a project I am working on with the Fadal 4020. Shortening and cutting lightening slots in these 1045 steel gear blanks. 2019-11-20_06-32-34 by Jackson EdwardsThe problem I am having is short tool life on the end ...

It's not just making partsYou don't make aerospace parts without finishing and assembly, part marking with specific inks. Using specific paints mixed and certain humidity, temp, and pot life times.Keeping track of every traceability information from start to finish. Material, ...

Need some help with machining C45 steel.I'm using new Korloy RM4 inserts with a Smoxh holder from Cutwel.PC5300 grade insert (universal for steel and stainless)Running at the recommended feed/speeds0,15mm/rev190m/minWOC: 40mmDOC: 1 to 2mmMachine: VM10iIt's not that bad of a surface ...

X Notice This website or its third-party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or ...

Looking for advice or options for drilling on forged 317. Blueprint says SA 182 317/317L Material is 205mm thick hole size is 25.6 mm, using an intimidator 120. Material has been machined down from raw forge and set up on ...